All AirServer Connect 2 as well as AirServer Connect 4K UHD units that were shipped after March 2019, have this functionality enabled by default.

If your unit was shipped before March 2019, it is still possible to configure AirServer Connect 4K UHD so that it automatically boots up when it receives power. This can be changed in the BIOS of the device. There it is possible to change what power-state it will go into when power is restored.

In order to change this setting you can follow these steps:

  1. You can access the BIOS by connecting a keyboard and keep pressing the F2 key when the device is powered on.
  2. Afterwards, go to the Power tab.
  3. We recommend setting the After Power Failure option to Power On.